There is much confusion about the mass-media lies that
promote the theory that air fires get hot enough to weaken or
melt steel... enough to cause steel skyscrapers to collapse
completely at FREE-FALL speeds (as if all the lower materials
can suddenly, and simultaneously, and symmetrically lose all
their strength at the same time, after such long delay periods,
to allow perfectly vertical collapses through the path of highest
resistance).

Why is it that controlled demolition
experts NEVER USE KEROSENE OR
JET FUEL AIR FIRES to completely
demolish highrise buildings?

Why?

FACT:

EVERY TIME

THEY NEED TO USE STEEL CUTTER
CHARGES (EXOTHERMIC CHEMICAL
REACTIONS TO CUT STEEL) PLUS
DEMOLITION EXPLOSIVES TO FULLY
DESTROY BUILDINGS DOWN TO THE
GROUND FLOORS! (eg. Thermite/thermate)

THE ONLY OTHER WAY A STEEL
FRAME BUILDING CAN COLLAPSE IS
FROM EARTHQUAKES, AND NO
STEEL BUILDING HAS EVER FALLEN
COMPLETELY TO THE GROUND IN
THE HISTORY OF CIVIL ENGINEERING!
Watch this movie and you will see 100%
undeniable proof of pre-planted
controlled demolitions being used to
knock down the Twin Towers and WTC7
(the 3 buildings that collapsed at freefall
speeds on 9/11)

Even the NIST reports agreed with the
live TV NEWS video footage, saying
that the WTC Twin Towers fell in around
10 seconds (as if all the lower materials
on lower levels were just as weak as air)

NOTE: A free-falling object falling from
the tops of those Twin Towers would
take only 9.5 seconds to hit the ground,
in a perfect vacuum. So a 10 second
collapse means that all the lower levels
or floors did not even slow down the
collapse at all... just like they had not
strength at all.

Also, notice the white/yellow hot molten
liquid steel pouring out of the South
Tower just minutes before its complete
collapse. Watch the ABC News video
and the amateur video footage.
melting point of steel is 1532 C.

HOW?

Share This